OPERATION OF THE AREARAE
2-17
10.
“Communicate with PC?”
allows you to upload data from
the AreaRAE to a PC or to download configuration
information from a PC to the AreaRAE.
Press [Y/+] and the message “Monitor will pause, OK?”
reminds you that during PC communication, there is no
real-time monitoring.
Press [Y/+] to proceed and the monitor enters communication
standby mode*. The “Ready...” display appears on the top
line of the LCD and the “Turn radio off!!” message appears
on the second line.
Note:
It is important to turn off the Radio button before
attempting to communicate with the PC.
Connect the monitor to the serial port on a PC. The monitor is
ready to receive any command from the PC.
Press [MODE] again to return to the first display.
*Note:
When the monitor is in communication standby mode, it
stops monitoring the gas concentration and stops
datalogging. Datalogging must be manually restarted when
exiting communication standby mode, when it is in manual
start/stop mode.