RADWAG Y/KTPS Series, Руководство пользователя

Страница: 36 / 53

•
Take the load off the pan of platform 1,
•
Press button . The following message appears during
adjusting start mass: „Evaluation of starting mass”,
•
After the procedure has been completed the following message
box appears:
•
Put calibration mass on pan of platform 1 and then select ,
•
After the procedure of calibration factor determination following
command appears:
•
Return to weighing, saving parameters.
< Setting of start mass> parameter allows to adjust
start mass of platform 1.
Notice:
The factory calibration process for platforms 2, 3, 4 is analogical to the one
described above.
36