RADWAG Y/KTPS Series, Руководство пользователя

Страница: 45 / 53

[1] Product test - Product code and name
Qn - Product nominal mass
TARE - Tare value attributed to the product
PUT 1 / 30 - Command concerning putting subsequent products
that are numbered out of the whole sample
T - Number of errors T (Lower than Qn –T) in the sample
2T - Number of errors 2T (Lower than Qn –2T) in the sample
Th. 1
- Sample number
av. - Average mass of controlled goods
OK - Test results: OK. - positive, WRONG - negative
Test in progress - Status
F5-End - Description of button terminating control
NET - Net mass of tested products
•
According to the command on the screen put on the weight pan
subsequent products and after stabilizing press to send
subsequent measurements to the computer,
•
After completing a test control following data are displayed in the
workspace:
18.8. Empty – full control
For controls „empty-full” in computer software KTP NET in the product
settings users can set a measurement „charge”. The weighing program
during testing requires putting a charge of empty packages and then
a charge of the same packages filled with products put in the same
sequence.
45