RADWAG WTC/4 3000 C8/EX, Инструкция по безопасности и эксплуатации

Страница: 45 / 58

- 45 -
22. ERROR MESSAGES
“Err2" - value beyond the zero range
"Err3" - value beyond the tare range
„Err4” – Calibration mass or start mass beyond the acceptable range (
±
1% for weight,
±
10 for start mass).
„Err5” – Mass of a single piece lower than the scale division.
"Err7" – power down time was to short (should be over 3s)
"Err8" – operation time exceeded tarring/zeroing
„null” – zero value from the AD converter
„FULL2” – measurement range overflow
„LH” – start mass error, the mass on the weighing platform is beyond the acceptable
range
±
10 of start mass.
„5 – FULL” – display range overflow in totalizing
.