RADWAG WTC/4 3000 C8/EX, Инструкция по безопасности и эксплуатации

Страница: 36 / 58

20.4. Per cent deviation with reference to standard mass
This program allows to measure deviation in per cent with reference to a standard mass.
The standard mass can be estimated by weighing (
PrcA function) or inscribed by a user
( PrcB function).
20.4.1. Control of % deviation referring to the inscribed standard mass.
Procedure:
•
Enter the function
•
place an load on the pan which mass will be accepted as standard
•
press PRINT to confirm this operating mode
•
after few seconds the indication 100,00% will be displayed
From this moment display will not indicate mass of weighed load but deviation of load
mass placed on the pan referring to the mass of standard (in %).
- 36 -