RADWAG WTC/4 3000 C8/EX, Инструкция по безопасности и эксплуатации

Страница: 17 / 58

13. FUNCTIONS OF KEYS
Power on/off – keep it pressed for about
1 sec
- function key (selection of operation mode)
Confirmation of changes
- zeroing
- tarring
Notice:
After pressing F +PRINT functions of keys change during setting parameters. See the
further part of the manual for details.
14. INSCRIPTIONS AND PICTOGRAMS
O.n. inscription Description
1. FIL Filtering level
2. PCS Counting pieces
3.
HiLo
Control and correction of zero indication of scale
4. Auto Measurement of max. force influencing weighing pan
5. toP Totalizing
6. Add Scale in autozero range (indication = precise zero)
7. Result of measurement is stable (ready for readout)
8. Scale in operating mode counting pieces
9.
PCS
Scale in operating mode weighing
10.
kg (g)
Scale is tarred.
11.
Net
+/- control in relation to reference mass – setting lower
threshold or mass below first range
12.
+/- control in relation to reference mass: mass of load
between set threshold
13.
+/- control in relation to reference mass – setting upper
threshold or mass above upper threshold.
14. Control and correction of zero indication of scale
- 17 -