RADWAG WTC/4 3000 C8/EX, Инструкция по безопасности и эксплуатации

Страница: 15 / 58

8.3. Switching on
•
Press the ON/OFF key– keep pressing for about 1 sec
•
After switching on wait for the test completion
•
You will see the indication equal zero and following pictograms:
- zero indication
- equilibrium
kg
or g - weighing mode
Ready to use.
9. CLEANING
Cleaning can be performed only after unplugging from mains
(230V AC). Use agents and materials that do not cause gathering
electrostatic charges on elements of the supplier. Do not use abrasive
agents and solvents because it can causa the damage of the casing.
..........Cleaning should be performed when the appearance of explosive gases is impossible.
10. SERVICE AND REPAIRING
In case of any problems with appropriate operation of the indicator contact with the
manufacturer’s service or any authorised service of RADWAG.
In case of any fault or dysfunction the device should be passed to the manufacturer’s
service or any authorised service of RADWAG or inform about it in order to settle the
conditions of repair.
Any intrusion (alteration, repair etc.) in the indicator or scale based on PUE
C/31H/EX indicator by unauthorised persons will cause a forfeiture of
validity of certificates, declarations and manufacturer’s warranty.
- 15 -