29
uuSt
Select to make the last digit on only when the weighing indication is stable.
•
Press
key to confirm, next go to the home screen.
14. COMMUNICATION
Communication between the scale and the peripheral devices is established
via the following ports: RS232 (1), RS232 (2), USB type A, USB type B. To set
the ports go to
<
P4.Conn
>
submenu.
14.1. RS232 (1) Port Settings
•
Enter
<P4.Conn / 4.1.rS1>
submenu and set respective transmission
parameters:
4.1.1.bAd
Baud rate: 2400, 4800, 9600, 19200, 38400, 57600, 115200 bit/s.
4.1.2.PAr
Parity:
nonE
– none;
EuEn
– even;
Odd
– odd.
•
Press
key to confirm, next go to the home screen.
14.2. RS232 (2) Port Settings
•
Enter
<P4.Conn / 4.2.rS2>
submenu and set respective transmission
parameters:
4.2.1.bAd
Baud rate: 2400, 4800, 9600, 19200, 38400, 57600, 115200 bit/s.
4.2.2.PAr
Parity:
nonE
– none;
EuEn
– even;
Odd
– odd.
•
Press
key to confirm, next go to the home screen.
14.3. USB A Port
USB port of type A is intended for:
•
Connecting a USB flash drive in order to enable:
-
operator's parameters export/import,
-
weighing reports export,
-
Alibi reports export.
•
Connecting scale to PCL printer.
•
Connecting EPSON TM-T20 printer (featuring USB port).
