22
12.2. User Adjustment
option available for non-verified scales exclusively
External adjustment must be carried out using an external adjustment weight
of class F
1
, and of mass value
≥
30% of the maximum capacity value.
Procedure:
•
Enter
<P1.CAL / 1.2.CA-u>
submenu, edit box for declaring weight mass
is displayed (the mass value must be
≥
30% of the maximum capacity
value).
•
Enter weight mass value and press
key to confirm, text
<UnLoAd>
(remove weight) is displayed.
•
Remove the load from the weighing pan and press
key.
•
Mass of an empty weighing pan is determined, this is signalled with
display of 'dash',
< - >
. Next, text
<LoAd>
(load weight) and mass
value that is to be loaded, e.g.
2000g
, are displayed.
•
Load the weighing pan with weight of specified mass value and press
key
.
•
Weight mass is determined, this is signalled with display of 'dash',
< - >
. Next, text
<UnLoAd>
(remove weight) is displayed.
•
Remove the load from the weighing pan,
<1.2.CA-u>
submenu
is displayed.
12.3. Manual Internal Adjustment
Manual internal adjustment is carried out using an in-built internal weight.
Adjustment requires stable ambient conditions (no air drafts,
ground vibrations, etc.). Adjustment must be carried out
when the weighing pan is unloaded.
Procedure:
•
In the course of regular scale operation press
key, adjustment
process is run automatically.
•
Adjustment process, when in progress, is signalled with display of 'dash',
< - >
.
•
Upon completed adjustment process, the scale automatically returns
to the weighing mode.
