RadTech BLIZZARD B84C-L, Руководство пользователя

Страница: 34 / 52

TROUBLESHOOTING
[32]
Note: Shield bearings must be greased every 8
working hours.
AVOIDABLE DAMAGES POSSIBLE CAUSES CORRECTIVE ACTIONS
S
HIELD
 Excessive wear of shield
bearings.
 Insufficient lubrication.
 Incorrect chain mounting.
 Shield interfering with
implement.
 Follow lubrication
instructions.
 Mount chain to allow
maximum angularity.
 Avoid contact of the shields
with fixed parts of the
machine or tractor.
 Replace shield bearings.
 Chain moving or failure.  Shield interfering with
implement.
 Incorrect chain mounting.
 Avoid contact of the shields
with fixed parts of the
machine or tractor.
 Mount chain to allow
maximum angularity.
 Replace defective parts.
 Shield cone damaged.  Shield cone in contact with
components on the tractor
and/or implement.
 Excessive angularity.
 Eliminate interference
between Shield cones and
any part on the tractor and/or
implement.
 Avoid excessive angle during
cornering or when lifting or
lowering the implement.
 Replace damaged Shield
cones.

Shield tubes damaged
(deformed and split at one
side).

Shields in contact with
components on the tractor
and/or implement.
 Shield tubes overlap too
short or no overlap at all
with extended driveline.

Eliminate interference
between Shield cones and
any part on the tractor and/or
implement.
 Replace damaged tubes.
 Adjust Shield tubes length
with longer tubes.