RadTech BLIZZARD B84C-L, Руководство пользователя

Страница: 22 / 52

ASSEMBLY
[20]
Remove the Snowblower from the Tractor
WARNING:
To avoid serious personal injury or death: Park the vehicle on level ground,
place the transmission in neutral, set the parking brake, place all control levers in neutral, shut
off the engine, remove the ignition key and allow the rotating parts to stop BEFORE working on
the vehicule.
With 3-Point Hitch
1. Figure 7: Lower the parking stand. To do this,
remove the round wire lock pin (item 8) from
the parking stand (item 7), lower the parking
stand and insert the round wire lock pin (item
9) under the snowblower attachment tube
.
2. Figure 7: Detach the upper arm (item 4) by
removing the linchpin and the pin (items 5).
Remove the bushing (item 9) if category 2.
3. Figure 7: Detach the driveline from the tractor
and attach the safety chain to the snowblower
for storage.
4. Figure 7: Detach the lower arms (item 2) by
removing the linchpins (items 3) and the hitch
pins (item 1). Remove the bushings (items 10)
if category 2.
Loosen the anti-sway arms and
slowly advance the tractor .
With Quick Hitch
1. Figure 7: Lower the parking stand. To do this,
remove the round wire lock pin (item 8) from
the parking stand (item 7), lower the parking
stand and insert the round wire lock pin (item
9) under the snowblower attachment tube
.
2. Detach the driveline from the tractor and
attach the safety chain to the snowblower for
storage.
3. Make sure the quick release latches are fully
open. Lower the 3-Point so that the hooks on
the quick-hitch are lower than the pins and the
snowblower bushings. Move the tractor
slowly
.
4. Close the quick release latches of the quick
hitch.
IMPORTANT: To avoid damaging the
snowblower, tighten all the bolts after the
first 10 hours of operation
.
Figure 7