RadTech 21700001, Руководство пользователя

Страница: 29 / 52

MAINTENANCE
[27]
L
UBRICATION
Use a grease gun and lubricate as follows:
D
ESCRIPTION
I
NTERVAL
R
EQUIRED
L
UBRICATION
Gearbox
Monthly
Check oil level. If needed, add extreme pressure oil, SAE
80W90 gear oil or equivalent.
Once a year Replace oil
Drive chain
4 hours
and after each operation
Lubricate with chain saw lubricant.
Drive shaft 24 hours of operation
Grease at the shear plate and the grooved section with the
grease fittings. Use a Shell Gadus S5 V100 grease or
equivalent.
Bearings 24 hours of operation
Grease each auger and drive shaft bearings. Use a Shell
Gadus S5 V100 grease or equivalent.
Driveline
8 hours
Grease each universal joint. Separate the sliding parts and
cover each with grease.
16 hours Oil the quick connect yokes.
IMPORTANT: Perform all the maintenance section without taking into account the hours given in the
following cases:
- At least once a year if the snowblower is used less than 20 hours annually.
- After each storage period.
- After each wash.