RadTech 21700001, Руководство пользователя

Страница: 30 / 52

MAINTENANCE
[28]
WARNING
To avoid serious personal injury:

Before cleaning, adjusting or repairing
the snowblower: bring the tractor to a
complete stop, lower the implement shut
off the engine and remove the ignition
key.

Never park the tractor inside a building
where an open flame or sparks are
present. Allow the engine to cool down
before storing in any enclosure.

Run the snowblower a few minutes after
blowing snow to prevent freeze up of
auger and fan.

Always remove the snowblower from the
subframe if you need to work on the
snowblower.
G
EARBOX
Oil Level – Oil Fill Up
To check oil level.
1. Remove the plug (item 1).
2. If the oil is not flush with the plug, fill until the
oil SAE 80W90, the AGMA 5EP extreme
pressure or equivalent flows through the oil
level plug hole.
3. Reinstall the plug (item 1).
Oil Change
1. Remove plug. (item 1).
2. Drain the oil by the oil level plug hole. (item 1)
3. Fill the reduction box / gearbox with SAE
80W90 oil, AGMA 5EP extreme pressure oil
or equivalent, fill until the oil flows through the
plug hole. filling with oil.
4. Replace the plug (item 1).
NOTE: When the gearbox is opened, the seal
must be re-established. To do this, apply a layer of
silicone to the surface of the casing before closing
it. Allow the silicone to dry for at least 24 hours
before filling with oil
.