RadTech 21700001, Руководство пользователя

Страница: 33 / 52

TROUBLESHOOTING
[31]
AVOIDABLE DAMAGES POSSIBLE CAUSES CORRECTIVE ACTIONS
C
ROSS
K
IT  Cross arms broken.  Extreme torque peak or
shock load.
 Axial loads too high.
 Use appropriate safety
device.
 Change to a larger driveline
size.
 Shorten driveline shaft.
 Replace defective cross
bearings.
 Bearing caps turning in their
cross journal.
 Overheated bearing caps.
 Excessive continuous
torque and/or excessive
working angle.
 Inadequate greasing.
 Verify compatibility between
shaft and working conditions.
 Carefully follow greasing
instructions.
 Replace defective cross
bearings.
 Accelerated wear of cross
kit.
 Excessive continuous
torque and/or excessive
working angle.
 Inadequate greasing.
 Verify compatibility between
shaft and working conditions.
 Carefully follow greasing
instructions.
 Replace defective cross
bearings.
Note: Cross bearings must be greased every 8 working hours.
AVOIDABLE DAMAGES POSSIBLE CAUSES CORRECTIVE ACTIONS
T
ELESCOPIC
T
UBES
 Telescopic tubes failure or
twisting.
 Extreme torque peak or
shock load.
 Short tube engagement.
 Use appropriate safety
device.
 Change to a larger driveline
size.
 Replace the driveline drive
shaft with one having
adequate length.
 Replace defective tubes.

Accelerated wear of
telescopic tubes.

Extreme load when sliding.
 Short tube engagement.
 Inadequate greasing.
 Dirt

Change to a driveline with
rilsan coated inner tube.

Replace the driveline with
one having adequate length.

Carefully follow greasing
instructions.
 Replace defective tubes.
Note: Telescopic tubes must be cleaned and greased every 8 working hours.