Page 18
Version 1.0
6.6.3 Selecting the Polarization
NOTE:
If a DiSEqC-controller is in use, this setting will be preset by the controller and
thus need not be repeated.
•
Use the
and
-keys to highlight the "LNB Polarity" field.
•
Press the MENU-key.
MENU/EXIT
Setup Value
Down Frequency
Manual Search
1 - 3 - 6 - 3
Symbol Rate
LNB Polarity
Horizontal
Video PID
auto
auto
Audio PID
Start Search
•
Use the
and
-keys to select either "Horizontal" or "Vertical" polarization
(listed in satellite-television magazines).
•
Press the MENU-key to confirm your entry.
6.6.4 Setting Video PID-Codes
Many channels will remain undetected by either an automatic or a manual channel search due to their
poor identification, in which case you may manually enter their proportional-integral-differential codes
(PID-codes, which appear listed in satellite-television magazines), which will allow you to receive them.
•
Use the
-key or
-key to highlight the "Video PID" field.
•
Enter the desired PID-code using the numerical keys and confirm your entry
by pressing the MENU-key.
EXIT
Setup Value
Down Frequency
Manual Search
1 - 3 - 6 - 4
Symbol Rate
LNB Polarity
0
auto
Audio PID
Start Search
Video PID
auto
Programming Your Receiver
…
