Version 1.0
Page 11
GB
6.4
The Main Menu: Setting Decoder Status
•
Use the CH
-key to highlight the "Decoder Status" field of the main menu and
confirm your choice by pressing the MENU-key.
6.4.1 Selecting a TV Aspect Ratio
•
Use the
-key or
-key to highlight the "TV Aspect Ratio" field of the main
menu and confirm your choice by pressing the MENU-key.
MENU/EXIT
Setup Value
TV Aspect Ratio
Decoder Status
1 - 4 - 1
DiSEqC Change
All Channel Clear
System Information
4 : 3
16 : 9
•
Use the
-key or
-key to highlight the “Setup value” field, select your TV
Aspect Ratio an confirm your choice by pressing the MENU-key.
6.4.2 Changing the DiSEqC Setting
NOTE:
Your satellite system must be equipped with a DiSEqC-switch if you intend to
work with digital satellite equipment control (DiSEqC). (For detailed information
on DiSEqC, refer to Section 6.5.3, below.)
•
Use the
-key to highlight the "DiSEqC Change" field and confirm your choice
by pressing the MENU-key.
MENU/EXIT
Setup Value
TV Aspect Ratio
Decoder Status
1 - 4 - 2
DiSEqC Change
OLD
NEW
All Channel Clear
System Information
1
1
LNB Polar
Vertical
Band
Low
Sat System
A
•
Use the
-key or
-key to switch between highlighting the "OLD" and "NEW"
fields and then use the
-key or
-key to select the desired setting.
•
Confirm your choice by pressing the MENU-key.
•
Press EXIT-key to exit this menu item.
Programming Your Receiver
EXIT