Page 12
Version 1.0
6.4.3 Clearing the Receiver's Memory
CAUTION:
Clearing the receiver's memory will delete all settings that have been made and
the receiver will have to be reprogrammed.
•
Highlight the "All Channel Clear" field and confirm your choice by pressing the
MENU-key. The following display will then appear onscreen:
Setup Value
TV Aspect Ratio
Decoder Status
1 - 4 - 3
DiSEqC Change
All Channel Clear
System Information
Input password
MENU/EXIT
•
Use the numerical keys to enter the password, which is
9-8-1-5
.
•
Press the MENU-key to confirm that all data stored in the receiver's memory
should be deleted.
6.4.4 Information on Decoder Status (System Information)
This menu item provides information on the status of your receiver's software.
•
Highlight the "System Information" field and confirm your choice by pressing
the MENU-key.
MENU/EXIT
Setup Value
TV Aspect Ratio
Decoder Status
1 - 4
DiSEqC Change
Data
: 6. MAY. 99
Revision
: ME 2.2 bNI
Firmware
: 2.08A / 0.30 / 0.83
All Channel Clear
System Information
•
Press the EXIT-key to exit the "System Information" menu item.
Programming Your Receiver
…
EXIT
