RadiSys PL35Q Скачать руководство пользователя страница 40 | Manualshive

Страница: 40 / 72

RadiSys PL35Q Скачать руководство пользователя страница 40

4

BIOS Configuration and OS Support

40

BIOS setup

To enter the BIOS setup utility, press the Delete key during system boot. The system BIOS setup
screens and menu options are the standard Phoenix TrustedCore BIOS screens with Q35
extensions. Use the up, down, left, and right arrow keys on your keyboard to navigate through
the menu options. Online help is provided in the BIOS setup screens to explain options.

After you have completed the BIOS settings, press F10 or use the commands on the Exit menu
to save changes. Press Esc to go immediately to the Exit menu.

For detailed instructions on BIOS configuration, refer to the

Procelerant Endura Q35 BIOS Setup

Utility Specification

.

Update and recovery

BIOS release packages are periodically available on the RadiSys Web site to address known
issues or to add new features. The release packages include detailed instructions for updating
the BIOS.

W

ARNING

!

BIOS updates should be undertaken with care and only when necessary. The BIOS

can be corrupted if the update is interrupted by a loss of power before it is complete, which will

require factory repair of the motherboard. Use the instructions provided with the BIOS update to

make sure the BIOS update is successful.

BIOS customization

The splash screen logo and default BIOS settings can be customized using the Phoenix BIOSEdit
tool. Contact your Phoenix sales representative for further information.

Operating system support

The following operating systems have been validated by RadiSys for Q35 motherboards:

Microsoft Windows XP Professional

Windows XP Embedded

Windows Vista

Red Hat Enterprise Linux

Solaris 10 Update 4

For instructions on installing the operating system, refer to the

Procelerant Endura Q35

Motherboard Quick Start Guide.

Drivers and utilities

The operating system you select may require you to install device drivers in order to make the
system operational. Visit the RadiSys Web site for device drivers and utilities

«
...
38
39
40
41
42
...
»

Содержание PL35Q









































































Отзывы:

Нет отзывов