RadiSys PL35Q, Руководство по эксплуатации продукта, Страница: 29 / 72

3
Video
29
VGA
Q35 motherboards provide a standard DA15F VGA connector on the rear I/O panel. The
integrated Intel GMA 3100 video controller supports:
ƒ
350MHz integrated 24-bit RAMDAC
ƒ
Resolution up to 2048x1536 pixels at 75Hz refresh
ƒ
DDC2B Compliant Interface
Dual DVI MEC
Use this procedure to set up dual DVI monitors using a dual DVI MEC.
1. Start the system and press the Delete key when prompted to enter the BIOS setup utility.
2. In the BIOS setup, navigate to the Advanced menu, then the Advanced Chipset Control
menu. Set the DVMT 4.0 Mode option to DVMT. Save this change and exit, and allow the
system to restart.
3. Visit the Intel download center Web site, www.dowloadcenter.intel.com , and download the
Intel Embedded Graphics Driver (IEGD) with CED, version 8.0.0. The file name is
“IEGD_8_0_GOLD_1063.exe”. Also download and review the IEGD Release Notes.
4. Uninstall the existing graphics driver on the motherboard. (If you are running Windows, go
to the Control Panel and select Add or Remove Programs.)
5. Install the IEGD according to the instructions provided in the IEGD User’s Guide. This will
disable the onboard video.
6. Install the dual DVI MEC in the PCI Express x16 slot. The bottom DVI port on the MEC is the
primary port, and should be functional immediately.
7. Use the IEGD Configuration Editor to set up your monitors as required (Clone, Extended,
etc.)
DVI-D
The PLVDS03-0-0 motherboard supports the attachment of one digital monitor to the DVI-D
port on the rear I/O panel with display resolution up to 1920 x 1200 @ 60 Hz.
S-Video
The PLVDS03-0-0 motherboard supports the attachment of TV monitors and video printers via
an S-Video port on the rear I/O panel. The TV-Out display resolution is up to 1400 x1050 @ 85
Hz.