Radiopost TS401 Скачать руководство пользователя страница 64

Страница: 64 / 70

■

Troubleshooting Guide

Troubles

Causes

Troubleshooting

Unable to transmit the radio. No battery or not

enough voltage.

Charge the battery.

Alarm

does not

stop.

Alarm sounds

continuously.

Low voltage of battery. Charge the battery.

Alarm sounds

at regular

intervals.

The interval timer is

“ON”.

Turn “OFF”

the interval.

No sound when pressing

keys.

The buzzer option is set

as “OFF”.

Turn the Buzzer

setting “ON” in

the system menu.

Servos move slowly.

The value set in the

speed menu is too low/

small.

Change the speed

setting value to the

default or higher value.

Low battery.

Check the battery.

Linkage is too tight.

Free the linkage from

binding.

Although the settings for

the left and the right are

same, the steering angles

are different.

Trim or Subtrim is not

in the neutral position.

Edit the trim and

subtrim.

Servo does not move to the

end of the range.

D-rate and EPA setting

values are too high.

Reset the linkage on

the servo.

Servo is not able to be

controlled by the trim

switch.

Trim is out of

operation range.

Set trim as zero “0”,

and put the servo

horn and linkage in

the neutral position.

Lap-timer and Interval timer

do not work.

Timer is set as “OFF”.

Set the timer as “ON”.

LED is blinking white or red.

White=Transmitter and

receiver are not bound

properly.

Repeat the bind

process again.

Red=Connection Lost.

Transmitter and receiver

do not bind.

Binding button of the

receiver has been

pressed for too long.

Press the button key

on the binding menu

immediately after

pressing the binding

button.

Содержание TS401







































































Результаты поиска

Содержание TS401

Отзывы:

Похожие инструкции для TS401

Бренды по названию

Популярные бренды

Radiopost TS401, Руководство пользователя

Результаты поиска

Содержание TS401

Отзывы:

Похожие инструкции для TS401

Бренды по названию

Популярные бренды