Radiopost TS401, Руководство пользователя

Страница: 5 / 70

5
▶ Do not drive the models on rainy days, on damp or humid days and or at
night. If the product(s) come in contact with water, malfunctions may
occur to the transmitter and the model and may cause the systems be out
of control.
Warning
▶ Covered part of the antenna may be slightly made into a smooth curve. But
do not fully bend it repeatedly or too sharply, which may cause unexpected
problems with the antenna.
▶ The antenna must be installed in the plastic tube or antenna pipe to stand
upright according to the RC model assembly instruction. It is highly
recommended to mount the antenna of receiver away from the motor, the
battery and the speed controller.
▶ If the connector of receiver shakes, an unexpected outcome may occur
during controlling. Please check if the receiver, the servo and the switch
connectors are firmly attached to the model.
▶ The receiver is sensitive to vibrations, impacts and humidity. Please take
appropriate measures for the receiver to be kept away vibration,
impact and humidity. If not, malfunctions or other problems may occur.
▶ When mounting the receiver, avoid any contact with carbon or metal chassis.
▶ The contact between metal components mounted on the product may
cause electrical noise and may cause malfunctions and decrease the
receiver‟s performance.
▶ The manufacturer is not responsible for the damages caused by the use of
parts other than Radiopost‟s genuine components.
▶ Use five AA-size dry cell batteries, five AA-size rechargeable batteries, or its
equivalents only. Batteries other than specified above may cause serious
damages on your TS401. Misuse of battery may void warranty.
Warning