Radiopost TS401 Скачать руководство пользователя страница 30

Страница: 30 / 70

5.6.2 Throttle EXP

Use the Throttle EXP to adjust the movement of throttle (Accelerator/

Brake) channel. The direction of accelerator and brake is separately

adjustable. The channel movement of accelerator direction is

adjustable as following 3 types.

• EXP: Adjust the sensitivity of movement in neutral by using

exponential curve.

• VTR: Put the curve point between the neutral point and the highest

throttle point to move in a different straight line before and

after the curve point.

• CRV: There are 3 designated curve points between the neutral

point and the highest point. (0~25%, 25~50%, 50~75%, 75~

100%). Set different movements between the curve points.

Brake direction is available to adjust by using the EXP only. If the

EXP value is less than “0”, the response of control in neutral would

be slower. In contrary, the EXP value is greater than “0”, the response

of control in neutral would be faster.

■

How to Set

•

EXP: Select EXP by pressing the

SET

on TYPE. Press the

DOWN

to move to FWD.

•

FWD: Press the

SET

on FWD and set the EXP values by using

the

LEFT

and

RIGHT

, After adjustment, press the

SET

once more to save the changed value. EXP value has

adjustable range between -100~100%, and default value

is 0%.

•

BRK: Press the

DOWN

to move to BRK. Press the

SET

on the

“BRK” and set the “EXP” value by using the

LEFT

and the

RIGHT

. After adjustment, press the

SET

once again to save

the changed Value. The EXP value has an adjustable range

between -100~100% and default value is 0%.

Содержание TS401







































































Результаты поиска

Содержание TS401

Отзывы:

Похожие инструкции для TS401

Бренды по названию

Популярные бренды

Radiopost TS401, Руководство пользователя

Результаты поиска

Содержание TS401

Отзывы:

Похожие инструкции для TS401

Бренды по названию

Популярные бренды