RadioMaster Zorro, Инструкция по эксплуатации

Страница: 34 / 39

at constant intervals.
Sticky v1 can only switch on, v2 can only switch off
AND Switch : With the arithmetic switch, this item can set any physical switch and logic
switch. The current logic switch can be triggered when the switch set by this item and the
current item meet the conditions
Duration : Hold time, the length of the current logic switch after it is triggered. If there is no
parameter, the default is always on. If this item is set for time (0.1-25 seconds), the current
logic switch will automatically turn off after this time.
Delay : Delay, after the trigger is turned on, the range is 0.0 to 25 seconds.
3.4.9. Special Functions
The combination of logic switches, special functions, global variables, and pass back items opens
up a variety of exciting new features for the RadioMaster TX12. E.g.
：
-Changes in battery voltage data returned by the receiver can trigger voice alerts
-Altitude data returned from the barometer on the aircraft, real-time broadcast of the
aircraft's altitude
-By defining voice for the switch, real-time voice broadcast operation on the radio
controller
-Use logic switches and global variables to let the radio controller perform a single or a
series of automated actions
-Call lua scripts with switches or logic switches for more advanced custom functions
-Use the knob to adjust the volume
-Use the switch to adjust the backlight brightness
In addition to a few of the commonly used methods listed above, the ever-changing features
allow you to realize your imagination
The three examples in the picture are represented as
：
SF1
：
When the SE switch position is
↑
, the CH3 channel will be covered by -100. Usually
this setting is used to lock the throttle.