RadioMaster Zorro, Инструкция по эксплуатации

Страница: 26 / 39

Mode : Select the corresponding flight mode, and the output trimming value that affects
this entry can be set by the flight mode entry
Switch : Select the switch to activate this item (Note: This setting is added to this item to
add multiple lines of different settings to switch, if there is only one line setting, do not set
the activation switch, otherwise the switch will cause this item to be completely invalid)
Side : Unilateral setting with the midpoint as the boundary. No matter how this item is set,
it will be set to unilateral effect by Side.
x>0 All below the midpoint are fixed at 0, and normal output above the midpoint
x<0
All above the midpoint is fixed at 0, and normal output below the midpoint
Trim : You can choose whether the fine-tuning is effective for this entry, or you can define a
fine-tuning that affects this article separately.
3.4.5. Mix control (Mixer)
Mixing page for channel settings
The mix control page allows you to combine as many input sources as you want and map them
to any one or more of the 32 output channels. Finally use the next page (Outputs) to make these
purely logical outputs to fit the model device
You have complete flexibility in controlling the mixing from any input to any output channel.
A mix puts one input into one channel. The inputs are configured in the Inputs page, which
defines any input type.
The mixing control page can also use other channels as the source of the current channel, and
output from the current channel after re-mixing. It can also mix one or more channels to
another or multiple channel outputs, which can combine very powerful complex functions.