RadioMaster Zorro, Инструкция по эксплуатации

Страница: 24 / 39

3.4.4. . Input Source（Inputs）
The Inputs page defines the input source. Before outputting to the channel, you can make
preliminary settings for the input source, such as limiting the amount of operation, increasing
the curve, using the switch pair to switch, etc.
The input source can be a physical operation source such as a gimbal, knob, or switch of the
radio control, or it can be a global variable Gvar, a logical switch, telemetry data, etc.
To set an entry, press and hold the ENT key on the current entry and a submenu will pop up.
Select Edit to change settings
Input : Name of the current entry. Use the scroll wheel to select a letter or number. Press
and hold the ENT key to switch between upper and lower case. Press the ENT key to switch
to the next character.
Name : Because each entry can have multiple lines of configuration, you can give each line a
name to avoid confusion in the future