Radiodetection 3300 Скачать руководство пользователя страница 9

Страница: 9 / 60

Keypad

I/O

Use the I/O key to turn the instrument on and off.

Backlight

Use the backlight key to turn the electrolumi-

nescent backlight on or off.

Contrast

Use the two arrow keys to change the contrast of

the LCD.

Zoom In, Zoom Out

Use the two zoom keys to “zoom”

in or out on an area of interest on the waveform display.

Waveform Position

Use the four arrow keys to move the

position of the waveform(s) left, right, up and down.

V Gain

Use the two arrow keys to decrease and increase

the vertical waveform amplitude or gain.

Range

Use the two range keys to increase and decrease

the cable distance displayed on screen. Pulse width and

vertical gain are automatically adjusted for each range.

Cursor

Use the two arrow keys to move the cursor left

and right.

A menu will pop-up when the asterisk key is pressed.

The unlabeled icon keys control a selection cursor for

choosing the desired instrument control. Once the control

is selected, pressing the asterisk key will close the pop-up

menu and activate the control.

When a control is activated, the icon keys will control the

function and on-screen icons will graphically represent how

the keys affect the control. The icons will change depend-

ing on the type of action in the particular control.

Содержание 3300





























































Результаты поиска

Содержание 3300

Отзывы:

Radiodetection 3300, Руководство по эксплуатации, Страница: 9 / 60

Результаты поиска

Содержание 3300

Отзывы: