Radiodetection 3300 Скачать руководство пользователя страница 14

Страница: 14 / 60

Pop-up menu

Pulse

Use the two icon keys to decrease and increase the

pulse width.

VOP

V/2

(depending on the velocity format setting cho-

sen in the setup menu) Use the two icon keys to decrease

and increase the velocity of propagation.

Balance

Use the two icon keys to adjust the output bal-

ance circuit.

Filter

Use the two icon key to cycle through the available

software filters.

Setup

Use the

key to display the setup options menu.

Store

Use the

key to store a waveform to an available

storage location.

Recall

Use the

key to recall a stored waveform from

memory and display the list of the stored waveforms.

Overlay

Use the two icon keys to adjust the trace separa-

tion in dual waveform display modes. This control is only

available when two waveforms are displayed.

Mode

Use the two icon keys to cycle through the available

display modes for single, dual, or difference waveform

display modes.

Print

Use the

key to print the on-screen waveform to a

serial printer for documentation.

Search

Use the

key to preform an auto-search of the

cable to find major faultsor the end of the cable.

Содержание 3300





























































Результаты поиска

Содержание 3300

Отзывы:

Radiodetection 3300, Руководство по эксплуатации, Страница: 14 / 60

Результаты поиска

Содержание 3300

Отзывы: