Radioddity DB25-D, Расширенное руководство, Страница: 83 / 209

Radiod d ity Extended manual for Radiod d ity DB25-D & GD-88 v2.0
© Radiod d ity 2022 page 83 of 209
•
Signaling off
→
press the [Select]-key to turn off the CTCSS/DCS code
→
‘ Set Ok ’ pops up on the screen and returns to the previous level.
•
CTCSS
→
press the [Select]-key
→
rotate the [ENC] knob or use the
[
▲
/
▼
]-keys to choose the CTCSS code
→
press the [Select]-key to
confirm
→
‘ Set Ok ’ pops up on the screen and returns to the previous
level.
• DCS
→
press the [Select]-key
→
rotate the [ENC] knob or use the [
▲
/
▼
]-
keys to choose the DCS code
→
press the [Select]-key to confirm
→
‘ Set
Ok ’ pops up on the screen and returns to the previous level.
• DCS Reverse
→
press the [Select]-key
→
rotate the [ENC] knob or use
the [
▲
/
▼
]-keys to choose the DCS Reverse code
→
press the [Select]-
key to confirm
→
‘ Set Ok ’ pops up on the screen and returns to the
previous level.
CTCSS Phase Reverse (Ctcss Tail)
1. Access the menu, press the [Menu]-key and rotate the [ENC] knob or use the
[
▲
/
▼
]-keys to choose Parameters and then press the [Select]-key to enter.
2. Rotate the [ENC] knob or use the [
▲
/
▼
]-keys to choose CtcssTail and press
the[Select]-key to enter.
3. Choose one of the options 55Hz , 120 °, 180 ° or 240 ° and press the [Select]-key
to confirm.
4. ‘ Set OK! ’ pops up on the screen and returns to the previous level.
10.8 Tone Set
If It is allowed by the
Radiod d ity
CPS software, set and check the prompt tones by
accessing the Tone Set menu.
Profiles
1. Access the menu, press the [Menu]-key and rotate the [ENC] knob or use the
[
▲
/
▼
]-keys to choose Tone Set and then press the [Select]-key to enter.
2. Rotate the [ENC] knob or use the [
▲
/
▼
]-keys to choose Profiles and press the
[Select]-key to enter.
3. Rotate the [ENC] knob or use the [
▲
/
▼
]-keys to choose General or Silent , and
press the [Select]-key to confirm the selection.
4. ‘ Profile is set ’ pops up on the screen and returns to the previous level.