Radioddity DB25-D, Расширенное руководство, Страница: 186 / 209

Radiod d ity Extended manual for Radiod d ity DB25-D & GD-88 v2.0
© Radiod d ity 2022 page 186 of 209
7. Set the output ‘ Power ’ to ‘ Low ’ as your hotspot is quite likely very close to your
Radiod d ity DB25-D.
8. Set ‘ PCT ’ to ‘ Patcs ’
9. Set ‘ RX TS ’ and ‘ TX TS ’ both to ‘ On ’ in order to not use TDMA for dividing the
channel into 2 slots.
10. Set ‘ RX CC ’ and ‘ TX CC ’ both to the very same value as your hotspot (normally
‘ 1 ’ ).
11. Set ‘ TX Policy ’ to ‘ Impolite ’
12. Set ‘ RX Group ’ to the previously defined RX group ‘ My RX Grp ’ .
13. Within the field ‘ Contacts ’ of the channel definition select the TalkGroup as
previously defined (e.g., ‘ TG 99 ’ ).
14. Set Encryption to ‘Off’
15. Set APRS to ‘ Off ’ for now
Write your settings to the radio. Do not forget to switch to Zone ‘ simplex HS ’ and
select channel ‘ HS TG 99 ’ at your Radiod d ity DB25-D or GD-88. Now you are ready
for your very first simplex digital DMR QSO using your hotspot.
16.6 Duplex digital DMR operation with Dual-HAT hotspot
In order to setup the radio for duplex digital DMR operation, follow these steps:
1. Within the ‘Contacts’ menu define a ‘Contact Name’ with the corresponding
‘Contact ID’ (DMR ID) of the other station
or TalkGroup you plan to call. Set the
‘Call Type’ to the required Call Type. Normally other stations require a Private
Call, whereas TalkGroups require a Call Type of Group Call. e.g.