Radioddity DB25-D, Расширенное руководство, Страница: 81 / 209

Radiod d ity Extended manual for Radiod d ity DB25-D & GD-88 v2.0
© Radiod d ity 2022 page 81 of 209
(2) Delay Time
→
press the [Select]-key
→
rotate the [ENC] knob or use the
[
▲
/
▼
]-keys to choose the delay time between 10 and 60 seconds
→
press
the [OK]-key to confirm
→
‘ Set OK! ’ pops up on the screen and returns to the
previous level.
(3) Duty cycle
→
press the [Select]-key
→
rotate the [ENC] knob or use the
[
▲
/
▼
]-keys to choose one of the options 1:1 , 1:2 or 1:4 and press the
[Select]-key to confirm
→
‘Set OK!’ pops up on the screen and returns to the
previous level.
Encryption (ENC Level)
1. Access the menu, press the [Menu]-key and rotate the [ENC] knob or use the
[
▲
/
▼
]-keys to choose Parameters and then press the [Select]-key to enter.
2. Rotate the [ENC] knob or use the [
▲
/
▼
]-keys to choose the desired encryption
level of either None , Low , Mid or High and press the [Select]-key to confirm.
3. ‘ Set Ok! ’ pops up on the screen and returns to the previous level.
Notes : If it is allowed by CPS software, enabling this function will help to prevent other
users from eavesdropping without authorization. However, encryption is not
a necessary requirement for receiving and transmitting. The receiver radio
must have the same AES 128 encryption method, level, alias, and values as the
transmitter radio to decrypt the encrypted voices from each other.
Amateur radio networks do not allow to use encryption.
Squelch Level (SQ level)
1. Access the menu, press the [Menu]-key and rotate the [ENC] knob or use the
[
▲
/
▼
]-keys to choose Parameters and then press the [Select]-key to enter.
2. Rotate the [ENC] knob or use the [
▲
/
▼
]-keys to choose the SQ Level and press
the [Select]-key to enter.
3. Rotate the [ENC] knob or use the [
▲
/
▼
]-keys to select the desired Level 1…12
or normally open ( Level 0 ), and press the [Select]-key to confirm.
4. ‘ Sq level is set' pops up on the screen and the radio returns to the previous
level.
Wide / Narrow Band (Bandwidth)
1. Access the menu, press the [Menu]-key and Rotate the [ENC] knob or use the
[
▲
/
▼
]-keys to choose Parameters and then press the [Select]-key to enter.
2. Rotate the [ENC] knob or use the [
▲
/
▼
]-keys to choose Band and press the
[Select]-key to enter.