Radioddity DB25-D, Расширенное руководство, Страница: 162 / 209

Radiod d ity Extended manual for Radiod d ity DB25-D & GD-88 v2.0
© Radiod d ity 2022 page 162 of 209
13.20 Contacts
Each digital channel may be assigned a specific Contact. Whenever the [PTT]-key
is pressed, the radio will start to transmit a call on the selected channel and
targeted to the specified contact our group. If a group call is initiated and another
Contact ID (group ID) is already active within that channel, the call will be
terminated to signal that a call may currently not be initiated.
If this parameter is set to ‘Off’, a call o n the channel will not be possible, making it
a RX-only channel. Only those Contacts, defined within the ‘Contact list’ may be
selected.
Notes: This parameter is only available in digital mode.
13.21 EAS (Emergency Alarm System)
Connect all available digital emergency systems to this channel for emergency
usage. To disable the use of the digital Alarm List, select ‘Off’.
Before using the Emergency Alarm System, it needs to be defined within the
‘Digital Alarm list’.
Notes: This parameter is only available in digital mode. Digital Alarm systems are
not supported within Ham radio networks.
13.22 Relay Monitor
Users can set the radio to output the received signal to the speaker during the
repeating operation. The option applies only for the specific channel.
Options : On Received signal will be heard if matching the specified
settings for digital RX-Group
Off No voice will be heard
Default: Off
13.23 Relay mode
The user can set the working mode of the current channel when the channel is in
relay mode.
Options : Off The channel may not be used for Relay operation.
Only RX Only receive is enabled when the channel is in relay
mode.
Only TX Only transmitting is enabled when the channel is in
relay mode.
RX and TX Receive and transmitting are enabled when the
channel is in relay mode.
Default: Off