RC1xxx-xSM-DK
2018 Radiocrafts AS
RC1xxx-xSM-DK User Manual (rev. 1.20)
Page 7 of 20
Radiocrafts
Embedded Wireless Solutions
Sensor Board Introduction
The Sensor Board includes the module to be evaluated. In addition it contains other circuitry
needed for powering and communication to the module. All I/O signals are routed to holes at
the edge suitable for 2.54 mm pitch pin headers for easy monitoring and control externally.
The board includes 6 different sensors and a controllable LED to demonstrate GPIO control
options.
Sensor
Manufacturer
Sensor Type
SHT35
Sensirion
Precision Temperature and Humidity Sensor
HDC2010
Texas Instruments
Low Power Temperature and Humidity Sensor
BME680
Bosch Sensortech
Environmental sensor (
Not supported in MSM v1.0
/ SSM v2.0
)
ALS-PT-315C
Everlight
Analogue Light Sensor
SL353LT
Honeywell
Hall detector
LIS3DE
ST
Accelerometer
Figure 3: Sensor Board
Antenna connector
sub 1GHz
Radiocrafts
Module
Power LED
LED/GPIO
P1: USB TO PC
RESET
BUTTON
Connector holes
P4/P5
Connector holes
P6/P7
Power selection
CC programming
connector
FW upgrade
PIFA PCB Antenna
2.4 GHz (not used)
P13: USB power
