RC1xxx-xSM-DK
2018 Radiocrafts AS
RC1xxx-xSM-DK User Manual (rev. 1.20)
Page 14 of 20
Radiocrafts
Embedded Wireless Solutions
Prototyping with the Sensor Board
The sensor board is well suited for prototyping/bread boarding. With all I/O pins easily
accessible at the edge, connection to external boards can be made through board stacking with
standard pin headers or cabled with standard 2.54 mm pitch cable.
With angled header mounted on I/O connector, the sensor board can also be mounted vertically
to other boards with 2.54mm pitch connectors.
The idea is that an external application specific circuitry/sensors etc. easily can be connected
to the sensor board as a proof of concept for the final product.
The sensor board is built to fit a commercially off the shelf enclosure named
Router Cube
from
New Age Enclosure. Available at Mouser. The sensor board is not delivered with enclosure.
Machining for connectors/antenna is required.
Figure 5 Optional enclosure from New Age Enclosures
