Radiocrafts RC1***-*SM-DK series, Руководство пользователя

Страница: 5 / 20

RC1xxx-xSM-DK

2018 Radiocrafts AS RC1xxx-xSM-DK User Manual (rev. 1.20) Page 5 of 20
Radiocrafts
Embedded Wireless Solutions
MSM Quick Start
The MSM Demonstration Kit is designed to make it easy for the user to evaluate the module,
do prototyping and develop an application.
The demonstration Kit consists of two boards: The Sensor Board and the MBUS development
board. To have a demo up and running in minutes, follow this guideline:
1. If you are using a RC1701HP-MSM-SB :
a. Connect the USB power adapter to P13
b.
Ensure the jumper described in “Powering the Sensor Board” (later in this
document)
is set to “USB power 1A”
2. If you are using a RC1180-MSM-SB :
a.
Ensure the jumper described in “Powering the Sensor Board” (later in this
document)
is set to “USB PC”
3. Connect the SB to a PC using the USB cable on P1
4. Connect the MBUS development board to a PC using USB
5. Open the MBUS-Demo tool (Free download at
www.radiocrafts.com )
6. The boards are already set up to use all the supported sensors on the board and
transfer data every minute. Therefore, all that is needed is to start the packet sniffer in
the MBUS-Demo tool:
a. Connect to the COM-port of the MBUS development board (not the SB)
b.
Press “Read module setting” arrow in the “Module Quick Setup” tab
c. Select MBUS Packet Sniffer tab
d. Press start
7. Packets should now start appearing in the list
To understand the data received, refer to the RCxxxxxx-MSM User Manual
Default key configuration parameters:
Parameter Setting
RF Power Maximum
MBUS Mode T1
M-field
A-field
VER
DEV 0x4824 (Radiocrafts)
0x12345678
0x01
0x00
Transmission interval 1 minute
Encryption Not used
Sensors used
GPIO : GPIO1 : out (LED), GPIO2-4 : inputs
ADC : AIN (via light transistor), Temp, VDD
HDC2010 : Tempe Humidity
SHT35 : Tempe Humidity
LIS3DE : X,Y,Z-axis
Detailed parameter list
Parameter RC1180-MSM RC1701HP-MSM
RF_Power 0x05 0x05
MBUS_MODE 0x01 0x01
MAN_ID1 0x48 0x48
MAN_ID2 0x24 0x24
MBUS A-Field ID1 0x12 0x12
MBUS A-Field ID2 0x34 0x34
MBUS A-Field ID3 0x56 0x56
MBUS A-Field ID4 0x78 0x78
MBUS A-Field VER 0x01 0x01