USING MACROS
P
ROGRAMMING
T
HE
COM MUTE K
EY
(
CONT
’
D
)
5. To save the macro, press and hold
P
until
the bottom IR segment flashes twice. The
program keys will appear again.
6. To program the second macro, repeat steps 4
and 5, but substitute
VOL
▲
for
VOL
▼
this
time (to raise the level four steps).
7. Exit programming by pressing
once. The
display will return to the last-selected device
menu screen
.
C
LEARING
A M
ACRO
1. Press and hold
P
until the bottom IR segment
flashes twice. The program keys will appear:
2. Press
MACRO
once. The
Macro
programming
screen will appear:
3. Select the macro key to be cleared and press it
once. The last-selected device menu screen
will be displayed.
4. Press and hold
P
until the bottom IR
segment flashes twice. The program keys
will appear again.
5. Exit programming by pressing
once. The
display will return to the last-selected device
menu screen
.
USING KEYMOVER
The RadioShack 8-in-One Remote includes a
Keymover
feature that allows you to map (or
copy) keys from one mode (i.e., source mode) to
another mode (i.e., destination mode).
NOTE
: Do not use any of the Device Keys as a source
or destination key.
P
ROGRAMMING
K
EYMOVER
For example, if your DVD player does not have
volume control, you can map those keys (i.e.,
VOL
▲
,
VOL
▼
, and
MUTE
) from the TV mode to
DVD mode as follows:
1. Press and hold
P
until the bottom IR segment
flashes twice. The program keys will appear:
2. Press
OTHER
once.The
Other
programming
screen will appear:
3. Using the number keys, enter
9 9 4
.
The bottom IR segment will flash twice.
20
Using Macros/Using Keymover
8-
IN
-O
NE
R
EMOTE
P
OWERED
B
Y
K
AMELEON
RS Kameleon 8in1 UG 7/9/03 1:03 PM Page 20