USING COMMERCIAL SKIP
P
ROGRAMMING
C
OMMERCIAL
S
KIP
(
CONT
’
D
)
3. Press and hold
P
until the bottom IR segment
flashes twice. The program keys will appear:
4. Press
OTHER
once.The
Other
programming
screen will appear:
5. Using the number keys, enter
9 7 4
. The
screen will flash twice and display the
Commercial Skip
programming screen.
6. Select a
Commercial Skip
mode by pressing
CBL
,
SAT
,
VCR
, or
AUX
once.
7. Press
FFWD
once and watch for the end of a
commercial sequence that typically may have
four to six commercials and last 2 to 3 minutes
in real time.As it ends, press
PLAY
once.
NOTE
: If the time between
FFWD
and
PLAY
key
presses exceeds 30 seconds, the program will ignore
your action. The bottom IR segment will display a
long flash to denote the time limit has been
exceeded and the screen will return to the Program
Keys menu. You will need to start again at step 4
and perform this step within 30 seconds.
NOTE
: Although
FFWD
and
PLAY
keys are used in
programming this step, other keys may be used
depending on how they functioned on the original
remote control.
8. To save the settings, press and hold
P
until
the bottom IR segment flashes twice. The
program keys will appear again.
9. Exit programming by pressing once. The
display will return to the last-selected device
menu screen
.
SETTING THE TILT SWITCH
The RadioShack 8-in-One Remote contains a
Tilt Switch
that activates the display when the
unit is moved. If desired, you can disable it so
only pressing a key will turn on the display.
NOTE
: Disabling the Tilt Switch can help conserve
battery life.
D
ISABLING
T
HE
T
ILT
S
WITCH
1. Press and hold
P
until the bottom IR segment
flashes twice. The program keys will appear
(as shown on the next page):
26
Using Commercial Skip/Setting The Tilt Switch
8-
IN
-O
NE
R
EMOTE
P
OWERED
B
Y
K
AMELEON
RS Kameleon 8in1 UG 7/9/03 1:03 PM Page 26
