2. Press
OTHER
once.The
Other
programming
screen will appear:
3. Using the number keys, enter
9 8 5
. The
screen will flash four times, confirming the
Tilt Switch
is disabled. The program keys will
appear again.
4. Exit programming by pressing once. The
display will return to the last-selected device
menu screen
.
E
NABLING
T
HE
T
ILT
S
WITCH
1. Perform steps 1 and 2 of the previous section,
Disabling The Tilt Switch
.
2. Using the number keys, enter
9 8 5
. The
screen will flash twice, confirming the
Tilt
Switch
is enabled. The program keys will
appear again.
3. Exit programming by pressing once. The
display will return to the last-selected device
menu screen
.
SETTING THE FINDER RECEIVER
The RadioShack 8-in-One Remote comes with
a
Finder Transmitter
that can be used to quickly
locate the main remote if it is accidentally lost
or misplaced.
At the factory, the
Finder Receiver
(inside the
remote) is set to wake up every few seconds,
listen for a signal from the
Finder Transmitter,
and then emit an audible alert to pinpoint the
location of the main remote. This is a great
feature, but it does use extra battery power.
If you do not plan to use the
Finder Transmitter
,
we recommend turning off the remote’s
Finder
Receiver
to conserve battery life.
D
ISABLING
T
HE
F
INDER
R
ECEIVER
1. Press and hold
P
until the bottom IR segment
flashes twice. The program keys will appear:
2. Press
OTHER
once.The
Other
programming
screen will appear:
continued next page...
Setting The Tilt Switch/Setting The Finder Receiver
27
O
WNER
’
S
M
ANUAL
RS Kameleon 8in1 UG 7/9/03 1:03 PM Page 27
