16
If you cannot find the problem, take your Emergency Phone Dialer to your local Ra-
dioShack store for assistance.
A Plug ’n Power module does
not work correctly with your sys-
tem.
Be sure you set the house and unit codes on
the module to the same letter and number as
the console.
Check that the module is on the same electri-
cal circuit as the console.
Refer to the owner’s manual that came with
the module.
Lights turn off when you activate
the alarm.
The system flashes lights by alternately
transmitting the All Lights On and All Units
Off signals, so appliances that were on when
the console activated turn off from the All
Units Off code, and stay off. To avoid this,
set the light modules to a different house
code than you set on the console.
Problem
Suggestion
49-2559.fm Page 16 Wednesday, August 18, 1999 3:29 PM
