Radio Shack Emergency Phone Dialer, Руководство пользователя

Страница: 15 / 20

15
TROUBLESHOOTING
We do not expect you to have any problems with your Emergency Phone Dialer, but
if you do, the following suggestions might help.
Problem Suggestion
The console’s alarm does not
turn on when you press
EMER-
GENCY CALL
on the pendant.
Be sure the console is plugged in (the AC
Power indicator is on).
Check that
Install/Run
is set to
Run
.
Test the call pendant’s battery and replace it
if necessary (see “Testing and Replacing the
Call Pendant’s Battery” on Page 9).
The console does not dial out
when you press
EMERGENCY
CALL
on the call pendant.
Be sure that you have stored phone numbers
(see “Storing Phone Numbers” on Page 9).
Make sure the console is connected to the
phone line.
Test the call pendant’s battery and replace it
if necessary (see “Testing and Replacing the
Call Pendant’s Battery” on Page 9).
The call pendant’s battery indi-
cator stays on when you initialize
the pendant. Remove the call pendant’s battery, wait a
few seconds, then replace the battery. Initial-
ize the pendant (see “Initializing the Call
Pendant” on Page 8).
The console’s BATTERY LOW
indicator is on. Replace the backup battery (see “Installing a
Backup Battery in the Console” on Page 6).
You lose your call pendant. Purchase another call pendant and re-install
your system. This prevents anyone from
using the lost pendant to activate your sys-
tem.
The console dials or its alarm
goes off by itself. Re-install the system.
The console does not play back
a message when someone
answers its call. Check your recorded message and record a
new one if necessary (see “Recording Your
Message” on Page 10).
49-2559.fm Page 15 Wednesday, August 18, 1999 3:29 PM