10
Important: Only program the dialer to
call persons with whom you have dis-
cussed your Emergency Phone Dialer.
You should
not
program the dialer to call
the police or other emergency services
directly.
Follow these steps to store your chosen
phone numbers.
1. Set
Install/Run
to
Install
.
2. Press
PROG
.
3. Enter the first phone number that
you want the dialer to call in the
event of a problem.
4. Press
MEM
.
5. Press
1
to store the phone number
in memory location 1.
To store additional numbers, repeat
Steps 2–5, but store the numbers (in
Step 5) in memory locations 2, 3, or 4.
You should store a number in each of
the 4 memory locations, even if you
have to store the same number more
than once.
RECORDING YOUR
MESSAGE
The message you record on your sys-
tem can be up to 15 seconds long and
should tell the person called that you
need help. Be sure the message states
that the listener can press any number
on their touch-tone phone to listen in. A
typical message might be:
“This is your neighbor Jane. I need help.
Please press any number button on your
phone so you can listen in, then come to
my house as quickly as you can.”
Follow these steps to record your mes-
sage.
1. Plug the supplied earphone into the
jack on the right side of the console.
49-2559.fm Page 10 Wednesday, August 18, 1999 3:29 PM
