Beyond the Basics
Setting up the Phonebook
Your phone allows you to store up to two numbers per name and
up to 100 names in your cordless handset and base phonebook.
Your phone shares memory between your phonebook and CID
with a total of 100 entries which are not used up by the two
phone numbers that can be stored per one name entry.
Once you store 100 phonebook entries, CID information will
not be stored and will only display at time of new incoming
calls. When phonebook entries are full, you will hear a beep and
MEMORY FULL appears. You cannot store any additional names
and numbers unless you delete some of the existing ones.
You can also use the phonebook or speed dial locations to store
a group of numbers (up to 32 digits) that you may need to enter
once your call connects. This is referred to as Chain Dialing. (See
page 48 for instructions.)
Creating Phonebook Entries
To store names and numbers in your phonebook, please follow
these steps:
1. When the phone is in standby mode, press (on the left
side of the four-way key).
2. To create a new phonebook entry, press the
NEW
soft key.
EDIT NAME appears.
3.
Enter the name for this entry (Edit Name).
Use the keypad to enter a name for this entry; the name can
contain up to 16 characters. (See page 26 for instructions
on entering text.) If you do not want to enter a name for this
entry, your phone will store this entry as NO. NAME. Press
the
OK
soft key when you are finished.
UP841BH_43-143_OM3.indd 34
12/19/2006 6:55:17 PM