Beyond the Basics
3. The answering machine announces the current time and the
number of messages stored in memory. You hear “To play
incoming messages, press zero-two. For help, press one-
zero” followed by a beep.
4. Start to enter a remote command sequence from the chart
below within 15 seconds. After the first command, you have
two seconds to enter the second command.
Command
Function
Command
Function
0
then
1
Repeat a
message*
0
then
6
Answering
machine on
0
then
2
Play incoming
messages
0
then
7
Memo record
start/stop**
0
then
3
Skip a message
0
then
8
Greeting
message record
start/stop**
0
then
4
Delete a message
0
then
9
Answering
machine off
0
then
5
Stop operation
1
then
0
Help
* If you press
0
then
1
in the first four seconds of a message,
the answering machine skips to the previous message. If you
press
0
then
1
after the first four seconds of a message, the
answering machine repeats the current message.
** When the first time you enter the Memo record or Greeting
message record command, it starts the recording. If you want
to stop the recording, enter the same command sequence
again, or press
0
, then
5
(Stop operation).
5. When you finish, you will hear intermittent beeps indicating
that the answering machine is in the command-waiting
mode. Enter another command from the chart within 15
seconds.
6. Hang up to exit the remote operation. The answering
machine automatically returns to its normal standby setting.
UP841BH_43-143_OM3.indd 85
12/19/2006 6:55:31 PM
