RS-125/230 User Manual
– Revision 1.05
SYSTEM OPERATION
Radiation Solutions Inc
– Proprietary
Page 3
Revision Date: December 11, 2015
2.0 SYSTEM OPERATION
2.1 BATTERIES
a)
LOAD BATTERIES in HOLDER
- the unit is shipped with
the batteries separate. Remove the Battery Cover by
depressing the Battery Cover Clip at each side. Load the 4
x AA cells with negative at the spring end. Slide the battery
Cover back in place ensuring that the side guides are lined
up
– if all OK the Cover should fit smoothly on.
b)
LOAD BATTERIES in UNIT
– slide the Battery Holder into
the base of the RS-125 with the battery Terminals on the
side of the copper terminals in the unit. (if in incorrectly the
unit will not power on). If all is OK the 2 side mounted
clips should “click” into place to hold the Battery Pack
solidly into the RS-125 unit.
THE RS-125 / 230 ARE SHIPPED WITH CHARGED
BATTERIES. HOWEVER OVER A PERIOD OF TIME THESE BATTERIES WILL DISCHARGE SO
USER ARE ADVISED TO FULLY CHARGE BATTERIES BEFORE USE (4hrs MINIMUM).
2.2 BUTTON
The RS-125 Super-Spec instrument has only ONE control
that is the front panel
PUSH-BUTTON
referred to as
BUTTON
.
This Button is actually mounted on the face of the
instrument but with the normal handle attached,
connection to the Button is via a mechanical link from the
Button on the handle.
The Button has 2 primary actions:
-
CLICK
– This is a click (SHORT) and release (less
than 1 second button action).
-
LONG
– This is a click (LONG) and hold action typically held for 3 seconds
with display feedback.
2.3 DISPLAY
The Display is a back lighted LCD display optimized for high
contrast in outdoor conditions. Display Backlighting is required in
low light conditions to make the display readable but this reduces
battery life so to optimize battery life the backlighting automatically
comes on ONLY when required. The Display is used for various
functions and messages.
Battery Cover
clip
Battery
Holder
Battery
Terminal
Battery
Cover
D-1009 REV 01.05 Status: RELEASED printed 18/12/2015 5:26:09 PM by Radiation Solutions Inc.
