RS-125/230 User Manual
– Revision 1.05
PC CONNECTIONS
Radiation Solutions Inc
– Proprietary
Page 34
Revision Date: December 11, 2015
Follow prompts and select the
*.gfw
file included in the upgrade package.
When this screen is seen - ensure that the batteries are charged up and/or
the Charger is plugged in as if the power dips during the upgrade process
the memory could crash and the unit would then be unusable and must be
returned to the factory.
Then click “NEXT” to start the process.
The firmware is then uploaded into the unit via USB and this takes
approximately 5 minutes.
Once the process is complete a new
screen appears.
The user selects “
FINISH
” and the new
firmware is “flashed” into the memory of
the unit and replaces the old firmware. If all is OK the unit disconnects
itself from the PC and restarts
– users hears a beep.
Unplug the USB port
– power the unit OFF. The power ON and verify that
the latest software version has been loaded.
SERVICE AIDS
For Maintenance support some special features have been added to the
RSAnalyst
software but
they require the system to be connected to a PC that is connected to the Internet to function as
designed.
If Maintenance is required, connect the unit via USB then
click this button.
User selects a checked box (or cancels all and
OK
to go back).
*************************
Device Parameters:
If user is experiencing problems with the unit they should discuss this with RSI (by email (at
). RSI may ask the user to send the PARAMETER file to RSI as
parameter setting errors can cause problems. In this case check the “
Device parameters
” box
only and then click
OK
.
The program then extracts the parameter file from the unit and sends it to RSI.
When RSI receives this file they inspect it and if changes are required RSI modifies this parameter
file and notifies the user by email.
The user then connects the unit to the PC and the PC to
the Internet and selects the “
Device parameters
” check
box then
OK
. This time the system logs onto the RSI site,
searches for the new parameter file (by unit serial number)
and automatically downloads the special customer file that
D-1009 REV 01.05 Status: RELEASED printed 18/12/2015 5:26:09 PM by Radiation Solutions Inc.
