RS-125/230 User Manual
– Revision 1.05
PC CONNECTIONS
Radiation Solutions Inc
– Proprietary
Page 24
Revision Date: December 11, 2015
b) Connection Via BLUETOOTH (BT)
NOTE: All except the early RS units have BT capability
– however in the early units the
software did not support this BT technology. In the latest software
5vXX
this BT is
fully supported. Users are advised that if they need BT capability, then install the
new v5xx software included in the download package using the USB connectivity
THEN test the BT to be sure all is OK. Contact RSI if you have problems problems.
Typically data transfer is 3x faster using USB
connections.
The following is a typical Windows XP setup. User
setup may slightly differ depending on the Operating
System but in principle the connection linkage is the
same.
Power
ON
the RS-121 unit and place it within 1m of the
PC being used.
On the PC select
START
– All Programs – Bluetooth
– Wireless Data Transfer.
This display appears as the unit searches for BT
devices nearby.
This display shows the unit has been found.
Click the box (green check sign in the picture).
Close this window (
red X
at top right of the box)
At the bottom right tray the BT sign will be seen;
– right click on this and select
Bluetooth settings
.
A new display is seen click
DETAILS
(sometimes a BT Password is asked for
– if required enter
0 0 0 0
)
Inspect the second display for
PORT NAME
– in this case
COM40
.
D-1009 REV 01.05 Status: RELEASED printed 18/12/2015 5:26:09 PM by Radiation Solutions Inc.
