RS-125/230 User Manual
– Revision 1.05
PC CONNECTIONS
Radiation Solutions Inc
– Proprietary
Page 35
Revision Date: December 11, 2015
RSI has loaded there after asking if OK to rewrite as in the figure.
Using these methods, RSI can make it very easy to help the user fine tune their units to resolve
specific problems.
Device Stabilization Logs:
If user is experiencing problems with the unit’s Stabilization performance they should advise RSI
by email (at
). When convenient connect the unit to the PC via
USB an
d connect to the Internet. Then click “
Session to maintainer
” and select the “
Device
stabilization logs
” then
OK
. The software will then automatically extract all relevant Stabilization
data from the system and send it to thee RSI FTP site where RSI Service can access it. RSI
Service will then analyze and communicate as required to resolve the issues.
Error detail
s
– the final data display on the maintenance
page is the error status. The RS unit has various internal
errors that are messaged on the display of the unit as a
!
below the clock display. Currently the only way to
understand this message, is to connect to the PC and view
this screen display. If errors occur, inspect this screen then contact RSI for resolution and advice.
4.5.6 ABOUT:
Selecting the About Icon displays the
About RSAnalyst
window. This will give you the current information about
the software installed. The User may also Upgrade the
software by using the
Upgrade
button
but this may
upgrade undocumented features so it is not
recommended unless advised by RSI
.
The
Close
button will close the window and return to the program.
4.5.7 QUIT:
Clicking on the
Quit Icon
will display a confirmation window for
the user to confirm that the program is to be terminated. Pressing
the Yes button will terminate the program.
D-1009 REV 01.05 Status: RELEASED printed 18/12/2015 5:26:09 PM by Radiation Solutions Inc.
