8
Chapter 7: Ethernet Configuration
The Set Communications Screen
Figure 7(1)
In addition to the touch screen interface, the Area Monitor
can communicate with a PC using USB and/or Ethernet and
the included Area Monitor PC Software. From the Calibration
Settings screen, tap the “Comms…” button to open the Set
Communications screen.
Tap the appropriate radio button to enable the Ethernet and or
Serial (USB) functionality. For Ethernet, the IP address of the PC
to which data will be sent must be specified on this screen. The modified Communications Settings will not be
applied until the “Set” button is tapped, at which point the display will return to the Calibration Settings
screen. Tap the “Back…” button instead to cancel any modified value(s) and return to the Calibration Settings
screen.
Figure 7(1)
The Area Monitor Server Software enables users to remotely monitor and configure the Radiation Alert Area
Monitor via USB or Ethernet, view the area monitors in real time, export collected data, and change the
settings of the unit.
Installing the Area Monitor Server PC Software
There is no additional charge for the Area Monitor Server Software. It can be downloaded at seintl.com/area_
monitor_software. Once you have downloaded the installer to the PC you would like to install the software on,
double click the exe file to begin your software installation. Follow the on-screen prompts until the install is
complete.
Area Monitor Server Software Menu Items
File Menu
Exit
To exit the software, click EXIT in the File Menu.
View Menu
Floor Plan
To load an image of your floor plan, go to View > Floor Plan to open the Floor Plan window. From here, you can
place the area monitors listed in the main window of the Area Monitor Server Software on a customized map
you can load into the software. Accepted file formats for floor plan images are jpg (jpeg), png, bmp, and tiff
files.
Chapter 8: Area Monitor PC Software