Radiant BH15UT, Инструкция по установке, эксплуатации и обслуживанию

Страница: 17 / 82

SECTION 5: G
ENERAL
S
USPENSION
D
ETAILS
11
SECTION 5: GENERAL SUSPENSION DETAILS
To ens u re yo u r safety, and comply w ith the terms of the
w arranty, all u nits m u st be installed in accordance w ith
these instr u ctions.
The gas or the electrical s u pply lines m u st not be u sed to
s u pport the heater.
Do not locate the gas or electric s u pply lines directly o v er
the path of the fl u e prod u cts from the heater.
The heater m u st be installed in a location that it is readily
accessible for ser v icing.
The heater m u st be installed in accordance w ith
clearances to comb u stibles as indicated in this man u al.
The minim u m and maxim u m gas inlet press u res m u st be
maintained as indicated on the rating plate. Typical
installation config
u rations are sho w n on Page 12, Figure
18 .
Note: Some modles w ill recei v e S-hooks (P/N 91907302)
or spring hooks (P/N 91903300), rather than bo w
shackles.
WARNING
Severe Injury Hazard
Secure burner to burner tube with bolts and
lockwashers.
Hang heater with materials with a minimum
working load of 75 lbs (33 kg).
Failure to follow these instructions can result
in death, injury or property damage.
WARNING
Cut/Pinch Hazard
Wear protective gear during installation,
operation and service.
Edges are sharp.
Failure to follow these instructions can result
in injury.