32
EN
◆
Adjustable sunshine position
◆
Adjustable ventilation position
◆
Radio code
◆
Execution of manual switching commands (Up / Stop / Down) from a
DuoFern transmitter, e.g. DuoFern Manual Transmitter
◆
Manual operation
◆
Adjustable running time
◆
Remote log on/off
◆
Wind travel direction
◆
Rain travel direction
◆
Software version
Further important information
◆
Saved settings are retained even in the event of a power failure. All settings are
active again after reconnection of the power supply.
◆
If it starts to rain, it can take some time before the DuoFern Environmental Sen-
sor detects rain, depending on the intensity of the rain and the outdoor tempera-
ture.
Radio code
You can connect the DuoFern Environmental Sensor to the DuoFern network using
the radio code.
The radio code is located on the bottom side of the DuoFern Environmental Sensor
and
on a label attached to the packaging.
Time window for activation via the radio code
After switching on the power supply, the radio code is active for a maximum of 2 hours.
Once this time has elapsed, activation using the radio code is no longer possible.
Briefly disconnect the DuoFern Environmental Sensor from the mains to reactivate
the time window.
Connection and control possibilities
An awning or Venetian blind drive can be connected to the tubular motor actuator. If
several awnings or Venetian blinds are to be controlled together, connection via an
additional multiple control relay is possible.
i
