40
EN
After wiring up the system and checking all connections, proceed as follows:
Commissioning
i
Android version
iOS version
Important information for service personnel and fitters
If necessary, the DuoFern Environmental Sensor can be reset to the factory settings,
see page 41.
i
1.
Switch on the mains power supply to the DuoFern Environmental Sensor.
2.
Call up the user interface.
You can call up the user interface of the HomePilot
®
using the HomePilot
®
app or via
the browser on a PC. You can download the HomePilot
®
app in the appropriate store
for the Android or iOS version.
Connect the DuoFern Environmental Sensor to the DuoFern network using the radio
code.
i
The logon matrix of the DuoFern Environmental sensor to log on DuoFern
devices can be found in the service area of our website:
www.rademacher.de
3.
Select the logged-on environmental sensor in the HomePilot ® app or the PC user
interface and start the reaction value configuration from the device settings.